Home
About Us
Product Catalog
Vertical Rotary parking
Two level parking system
Three level parking system
Multi level parking system
Three levels with pit puzzle parking system
Back cantilever parking system
Two level with pit parking system
Three level with pit parking system
Two post parking system
Tilting parking system
Video
News
Contact Us

Multi level parking system 

4-7 LEVEL LIFT/SLIDING PARKING SYSTEM

 

Operating principle

Equipment for the arrangement of columns of six layers, each device partition one layer to five layers each with a sliding seat. Equipment through six layers of vehicle lifting movement, a layer of vehicle shifting action, the two layer to the five layer of vehicle loading plate lifting, shifting action to achieve access to the car. A layer of parking spaces can directly access the car; two to six layers of a parking space needed to access the car, each layer corresponds to the vehicle loading plate underneath the vehicle traversing a parking position, will need to access the car seat for vehicle loading plate below, so that the vehicle can fail down to the ground, so as to realize the access the car.

 Features

 

  1. Save land area and take full use of space and columns can be arranged according to your requirements.
  2. About awning design, can be designed according to your requirements, such as full awning type, part awning type and simple awning type and no awning type.
  3. Low equipment cost and maintenance cost.
  4. Lift smooth and low noise, convenient for car go in or out.
  5. Comprehensive security protection system, such as safety anti-falling hook, mechanism detect people or car entering, car parking limit mechanism, interlock mechanism, emergency brake mechanism.
  6. Adopt PLC automatic control system, use button, IC card and remote control system, make operation very easy.

 

  Applicable occasion

Ground and underground parking lots in   residential  area;   commercial center and office building; station and hospital.

 

Technical requirements

1. The ground must be reinforced concrete, in order to facilitate the column and the expansion bolt

2. Ground must be neat, ensure the height difference is ±5mm;

3. Equipment needs height ≥3600mm (the size of net space height after deducting the fire tube, a ventilating pine all equipment);

4. The equipment should be installed in the outdoor, canopy.

Specifications

 

 

 

Suitable parking cars

Model

Mid-size car

Large car

Over size car

car size

Length x width x height

Length x width x height

Length x width x height

(mm)

≤4700x1800x1450

≤5000x1850x1550

≤5300x1900x1550

 

e.g.: Passat

e.g.: Audi A6

e.g.: BMW 7 series

Weight

≤1500kg

≤1700kg

≤2350kg

 

 

 

Requirement spark

p

4-6

4-6

4-6

a(mm)

5600

5900

6200

b(mm)

2950

3250

3550

c(mm)

1130

1130

1130

N(mm)

2450

2450

2550

h(mm)

1700

1700

1700

H(mm)

h*p+3600

h*p+3600

h*p+3600

Motor power

lift motor

2.2,3.7kw

2.2,3.7kw

2.2,3.7kw

sliding motor

0.2kw

0.2kw

0.2kw

Rated speed

lift speed

4.8,7.0m/min

4.8,7.0m/min

4.8,7.0m/min

sliding speed

6.4,9.5m/min

6.4,9.5m/min

6.4,9.5m/min

Power

 

motor, chain

motor, chain

motor, chain

Power

 

3phase 5 wire 380v 50hz

3phase 5 wire 380v 51hz

3phase 5 wire 380v 52hz

Control mode

 

button, IC card and remote control system

Surface treatment

 

painting galvanized

painting galvanized

painting galvanized

Inner width of pallet

 

2030

2080

2130

 


Home  |  About Us  |  Product Catalog  |  Vertical Rotary parking  |  Two level parking system  |  Three level parking system  |  Multi level parking system  |  Three levels with pit puzzle parking system  |  Back cantilever parking system  |  Two level with pit parking system  |  Three level with pit parking system  |  Two post parking system  |  Tilting parking system  |  Video  |  News  |  Contact Us  |  Sitemap  |  Mobile Version
Powered by DIYTrade.com